Plug & Play/ MVP series

Z-axis servo motor coupled directly to ballscrew

+No more Z-axis timing belt, the servo is connected to the ballscrew. There is no more need to maintain or replace the timing belt.

Z-axis servo motor upgraded and no counter-balance block (opt.)

+Special package to improve the precision of Z-axis movement in high speed machining.

Greater column

+1100mm (MVP8/10) wide column case. The column on the MVP features a heavier structure than competing models to upgraded stability.The column and base are oversized fully ribbed to support heavy loads without table deflection.

+Drain through built-in on working table.
Incorporated oil fluid separation on casting design

+Eco-friendly design. Efficient oil and fluid separation incorporated on casting design prevents cutting fluid deterioration.

1600mm oversized base

+One piece Meehanite casting which is stable, rigid and rugged. To ensure maximum rigidity, the MVP-8 and MVP-10 are built on heavy duty Meehanite casting. Also, all axes are reinforced to provide upper most rigidity and stability.

φ50 ballscrews on 3 axes(MVP-13)

+All ballscrews are center mounted and supported on both ends by high precision angular contact thrust bearing. All servo motors with absolute encoders for increasing efficiency and dependability. (FANUC and Mitsubishi only)

Product description

Z-axis servo motor coupled directly to ballscrew

+No more Z-axis timing belt, the servo is connected to the ballscrew. There is no more need to maintain or replace the timing belt.

Z-axis servo motor upgraded and no counter-balance block (opt.)

+Special package to improve the precision of Z-axis movement in high speed machining.

Greater column

+1100mm (MVP8/10) wide column case. The column on the MVP features a heavier structure than competing models to upgraded stability.The column and base are oversized fully ribbed to support heavy loads without table deflection.

+Drain through built-in on working table.
Incorporated oil fluid separation on casting design

+Eco-friendly design. Efficient oil and fluid separation incorporated on casting design prevents cutting fluid deterioration.

1600mm oversized base

+One piece Meehanite casting which is stable, rigid and rugged. To ensure maximum rigidity, the MVP-8 and MVP-10 are built on heavy duty Meehanite casting. Also, all axes are reinforced to provide upper most rigidity and stability.

φ50 ballscrews on 3 axes(MVP-13)

+All ballscrews are center mounted and supported on both ends by high precision angular contact thrust bearing. All servo motors with absolute encoders for increasing efficiency and dependability. (FANUC and Mitsubishi only)

 

GET A QUOTE


Please contact us if you are interested in our products:

MVP-8

Machine Model Plug & Play MVP-8

Table

Working surface – 1000×560 mm
T-slot (size x number x pitch) – 18x5x100 mm
Max. table load – 500 kg

Travel

X-axis tarvel – 860 mm
Y-axis tarvel – 530 mm
Z-axis travel – 630 mm
Distance from spindle end to table center – 85~715 mm
Distance from spindle center to column – 600 mm

Spindle

Spindle speed(Pulley) – 8000 (opt.10000/12000) rpm
Spindle speed(DDS) – opt.10000/12000/15000/20000 rpm
Spindle nose taper – #40

Feed

Cutting feedrate – 20/20/20 m/min
(X/Y/Z axis)
Rapid traverse rate – 36/36/30 (opt.48/48/36) m/min
(X/Y/Z axis)

ATC

Tool storage capacity – S:20 (opt.A:24/30) pcs
Max. tool weight – 7 kg
Max. Tool size – S:Ø90x250L mm A:Ø75x300L mm
Tool shank – BT40 / CAT / DIN / HSK-A63 (20000rpm only)

Other

Electric power consumption – 25KVA
Floor space (full guarding) – 3100×2665 mm
Net weight – S:6400 kg A:6500 kg

MVP-10

Machine Model Plug & Play MVP-10

Table

Working surface – 1150×560 mm
T-slot (size x number x pitch) – 18x5x100 mm
Max. table load – 700 kg

Travel

X-axis tarvel – 1050 mm
Y-axis tarvel – 530 mm
Z-axis travel – 630 mm
Distance from spindle end to table center – 85~715 mm
Distance from spindle center to column – 600 mm

Spindle

Spindle speed(Pulley) – 8000 (opt.10000/12000) rpm
Spindle speed(DDS) – opt.10000/12000/15000/20000 rpm
Spindle nose taper – #40

Feed

Cutting feedrate – 20/20/20 m/min
(X/Y/Z axis)
Rapid traverse rate – 36/36/30 (opt.48/48/36) m/min
(X/Y/Z axis)

ATC

Tool storage capacity – S:20 (opt.A:24/30) pcs
Max. tool weight – 7 kg
Max. Tool size – S:Ø90x250L mm A:Ø75x300L mm
Tool shank – BT40 / CAT / DIN / HSK-A63 (20000rpm only)

Other

Electric power consumption – 28KVA
Floor space (full guarding) – 3500×2665 mm
Net weight – S:6600 kg A:6700 kg

MVP-11

Machine Model Plug & Play MVP-11

Table

Working surface – 1270×600 mm
T-slot (size x number x pitch) – 18x5x100 mm
Max. table load – 1000 kg

Travel

X-axis tarvel – 1100 mm
Y-axis tarvel – 600 mm
Z-axis travel – 630 mm
Distance from spindle end to table center – 100~730 mm
Distance from spindle center to column – 641 mm

Spindle

Spindle speed(Pulley) – 8000 (opt.10000/12000) rpm
Spindle speed(DDS) – opt.10000/12000/15000/20000 rpm
Spindle nose taper – #40

Feed

Cutting feedrate – 10/10/10 m/min
(X/Y/Z axis)
Rapid traverse rate – 36/36/30 m/min
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (opt.A:30/40 S:16) pcs
Max. tool weight – 7 kg
Max. Tool size – S:Ø90x250L mm A:Ø75x300L mm
Tool shank – BT40 / CAT / DIN / HSK-A63 (20000rpm only)

Other

Electric power consumption – 28KVA
Floor space (full guarding) – 3500×2665 mm
Net weight – S:6130 kg A:6230 kg

MVP-13

Machine Model Plug & Play MVP-13

Table

Working surface – 1400×700 mm
T-slot (size x number x pitch) – 18x7x100 mm
Max. table load – 1500 kg

Travel

X-axis tarvel – 1300 mm
Y-axis tarvel – 700 mm
Z-axis travel – 650 mm
Distance from spindle end to table center – 120~770 mm
Distance from spindle center to column – 780 mm

Spindle

Spindle speed(Pulley) – 8000 (opt.10000) rpm
Spindle speed(DDS) – opt.10000/12000/15000/20000 rpm
Spindle nose taper – #40

Feed

Cutting feedrate – 20/20/20 m/min
(X/Y/Z axis)
Rapid traverse rate – 36/36/30 m/min
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (opt.A:30/40) pcs
Max. tool weight – 7 kg
Max. Tool size – A:Ø75x300L mm
Tool shank – BT40 / CAT / DIN / HSK-A63 (20000rpm only)

Other

Electric power consumption – 35KVA
Floor space (full guarding) – 3900×3000 mm
Net weight – A:9000 kg

MVP-16

Machine Model Plug & Play MVP-16

Table

Working surface – 1750×820 mm
T-slot (size x number x pitch) – 18x7x100 mm
Max. table load – 2000 kg

Travel

X-axis tarvel – 1600 mm
Y-axis tarvel – 820 mm
Z-axis travel – 700 mm
Distance from spindle end to table center – 120~820 mm (opt 320~1020)
Distance from spindle center to column – 900 mm

Spindle

Spindle speed(Pulley) – #40 -8000 (opt.10000/12000) rpm
Spindle speed(DDS) – #40 -opt.10000/12000/15000/20000 rpm, #50 -opt.10000/12000rpm
Spindle speed (Gear) – #50 -6000 (opt.8000)rpm
Spindle nose taper – #40, #50

Feed

Cutting feedrate – 20/20/20 m/min (20/20/12 #50 Z-axis box guideway)
(X/Y/Z axis)
Rapid traverse rate – 32/32/24 m/min
(X/Y/Z axis)

ATC

Tool storage capacity – #40 S:16 (opt.A:24/30/40) pcs / #50 A:24 (opt.32/40) pcs
Max. tool weight – #40 -7kg, #50 – 20kg
Max. Tool size – #40 -S:Ø90x250L, A:Ø75x300L mm
#50 -A:Ø125x350L mm
Tool shank – BT40 / BT50 / CAT / DIN /

Other

Electric power consumption – 30KVA
Floor space (full guarding) – 4000×3255 mm
Net weight – #40 -10650 kg, #50 – 11500 kg