Super Tornado/ HCMC series

Maximum support

+Zero overhang design for optimum stability.

Axis overhang

+The base has been redesigned to widen the support points on the base and guarantee full support throughout the X axis traverses.

Column extension delivers higher stability

+The base of the machine has also been redesigned to deliver exceptional stability under heavier cutting loads.

3-axis with temperature controlled structure(HCMC-1100 opt.)

+We have added recirculating cooling channels at each of these heat points to ensure that the thermal deformation is not an issue and positional accuracy is always maintained.

A+ structure for HCMC-1100

+Wider column base interface to enhance stability and efficient force dissipation.

Axis overhang

+The base has been redesigned to widen the support points on the base and guarantee full support throughout the X axis traverses.

Column extension delivers higher stability

+The base of the machine has also been redesigned to deliver exceptional stability under heavier cutting loads.

3-axis with temperature controlled structure(HCMC-1100 opt.)

+We have added recirculating cooling channels at each of these heat points to ensure that the thermal deformation is not an issue and positional accuracy is always maintained.

A+ structure for HCMC-1100

+Wider column base interface to enhance stability and efficient force dissipation.

Product description

Maximum support

+Zero overhang design for optimum stability.

Axis overhang

+The base has been redesigned to widen the support points on the base and guarantee full support throughout the X axis traverses.

Column extension delivers higher stability

+The base of the machine has also been redesigned to deliver exceptional stability under heavier cutting loads.

3-axis with temperature controlled structure(HCMC-1100 opt.)

+We have added recirculating cooling channels at each of these heat points to ensure that the thermal deformation is not an issue and positional accuracy is always maintained.

A+ structure for HCMC-1100

+Wider column base interface to enhance stability and efficient force dissipation.

+Zero overhang design for optimum stability.

Axis overhang

+The base has been redesigned to widen the support points on the base and guarantee full support throughout the X axis traverses.

Column extension delivers higher stability

+The base of the machine has also been redesigned to deliver exceptional stability under heavier cutting loads.

3-axis with temperature controlled structure(HCMC-1100 opt.)

+We have added recirculating cooling channels at each of these heat points to ensure that the thermal deformation is not an issue and positional accuracy is always maintained.

A+ structure for HCMC-1100

+Wider column base interface to enhance stability and efficient force dissipation.

GET A QUOTE

Please contact us if you are interested in our products:

 

HCMC-1100

Machine Model box way Super Tornado – HCMC-1100

Table

Working surface – 1270×600 mm
T-slot (size x number x pitch) – 18x5x120 mm
Max. table load – 1200 kg

Travel

X-axis tarvel – 1100 mm
Y-axis tarvel – 600 mm
Z-axis travel – 630 mm
Distance from spindle end to table center – 100~730 mm
Distance from spindle center to column – 645 mm

Spindle

Spindle speed(Pulley) – #40 -8000 (opt.10000/12000) rpm
Gear -6000 (opt.8000) rpm
Spindle speed(gear) – #50 6000 (opt.8000) DDS 10000 (opt.12000) rpm
Spindle nose taper – #40, #50

Feed

Cutting feedrate – 12 m/min
Rapid traverse rate – 24/24/20 m/min
(X/Y/Z axis)

ATC

Tool storage capacity – #40 -S:16 A:24pcs, #50 -S:16 A:24pcs
Max. tool weight – #40 -7kg, #50 – 15kg
Max. Tool size – #40 -S:Ø90x250L mm A:Ø75x300L mm
#50 -A:Ø105x300L mm
Tool shank – BT40 / BT50 / CAT / DIN /

Other

Electric power consumption – #40 -25KVA, #50 -30KVA
Floor space (full guarding) – #40 2900x2714x2930 mm
#50 2900x2714x3008 mm
Net weight -#40 -7950 kg, #50 -8200 kg

HCMC-1270

Machine Model box way Super Tornado – HCMC-1270

Table

Working surface – 1370×650 mm
T-slot (size x number x pitch) – 18x5x130 mm
Max. table load – 1200 kg

Travel

X-axis tarvel – 1270 mm
Y-axis tarvel – 650 mm
Z-axis travel – 630 mm
Distance from spindle end to table center – 120~750 mm (opt.320~950)
Distance from spindle center to column – 695 mm

Spindle

Spindle speed(Pulley) – #40 -8000 (opt.10000/12000) rpm
Gear -6000 (opt.8000), DDS 10000 (opt.15000) rpm
Spindle speed(gear) – #50 6000 (opt.8000) DDS 10000 (opt.12000) rpm
Spindle nose taper – #40, #50

Feed

Cutting feedrate – 12 m/min
Rapid traverse rate – #40 -24/24/20, #50 -24/24/18 m/min
(X/Y/Z axis)

ATC

Tool storage capacity – #40 -S:16 A:24 (30/40)pcs, #50 -A:24 (32)pcs
Max. tool weight – #40 -7kg, #50 – 15kg
Max. Tool size – #40 -S:Ø90x250L mm A:Ø75x300L mm
#50 -A:Ø105x300L mm
Tool shank – BT40 / BT50 / CAT / DIN /

Other

Electric power consumption – #40 -25KVA, #50 -30KVA
Floor space (full guarding) – #40 3450x3890x3000 mm
#50 3450x3980x3150 mm
Net weight -#40 -7350 kg, #50 -7600 kg

HCMC-1370

Machine Model box way Super Tornado – HCMC-1370

Table

Working surface – 1450×700 mm
T-slot (size x number x pitch) – 18x5x130 mm
Max. table load – 1500 kg

Travel

X-axis tarvel – 1300 mm
Y-axis tarvel – 700 mm
Z-axis travel – 660 mm
Distance from spindle end to table center – 120~780 mm (opt.320~980)
Distance from spindle center to column – 745 mm

Spindle

Spindle speed(gear) – 4000 (opt.6000/8000) DDS 10000 (opt.12000) rpm
Spindle nose taper – #50

Feed

Cutting feedrate – 12 m/min
Rapid traverse rate – 24/24/20
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (32/40)pcs
Max. tool weight – 20kg
Max. Tool size – A:Ø125x350L mm
Tool shank – BT50 / CAT / DIN /

Other

Electric power consumption – 30KVA
Floor space (full guarding) – 3450x4140x3425 mm
Net weight – 9000 kg

HCMC-1682

Machine Model box way Super Tornado – HCMC-1682

Table

Working surface – 1750×820 mm
T-slot (size x number x pitch) – 18x5x150 mm
Max. table load – 2200 kg

Travel

X-axis tarvel – 1600 mm
Y-axis tarvel – 820 mm
Z-axis travel – 660 mm (opt.820)
Distance from spindle end to table center – 150~810 mm (opt.200~1020)
Distance from spindle center to column – 865 mm

Spindle

Spindle speed(gear) – 4000 (opt.6000/8000) (opt.DDS 10000/12000) rpm
Spindle nose taper – #50

Feed

Cutting feedrate – 12 m/min
Rapid traverse rate – 20/20/18
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (32/40)pcs
Max. tool weight – 20kg
Max. Tool size – A:Ø125x350L mm
Tool shank – BT50 / CAT / DIN /

Other

Electric power consumption – 30KVA
Floor space (full guarding) – 4000x4310x3380 mm
Net weight – 12400 kg

HCMC-2082

Machine Model box way Super Tornado – HCMC-2082

Table

Working surface – 2150×820 mm
T-slot (size x number x pitch) – 18x5x150 mm
Max. table load – 2600 kg

Travel

X-axis tarvel – 2060 mm
Y-axis tarvel – 820 mm
Z-axis travel – 660 mm (opt.820)
Distance from spindle end to table center – 150~810 mm (opt.200~1020)
Distance from spindle center to column – 865 mm

Spindle

Spindle speed(gear) – 4000 (opt.6000/8000) (opt.DDS 10000/12000) rpm
Spindle nose taper – #50

Feed

Cutting feedrate – 12 m/min
Rapid traverse rate – 18/18/18
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (32/40)pcs
Max. tool weight – 20kg
Max. Tool size – A:Ø125x350L mm
Tool shank – BT50 / CAT / DIN /

Other

Electric power consumption – 30KVA
Floor space (full guarding) – 5000x4310x3380 mm
Net weight – 13000 kg

HCMC-1692

Machine Model box way Super Tornado – HCMC-1692

Table

Working surface – 1750×920 mm
T-slot (size x number x pitch) – 20x7x125 mm
Max. table load – 2500 kg

Travel

X-axis tarvel – 1600 mm
Y-axis tarvel – 920 mm
Z-axis travel – 820 mm
Distance from spindle end to table center – 200~1020 mm (opt.400~1220)
Distance from spindle center to column – 965 mm

Spindle

Spindle speed(gear) – 4000 (opt.6000/8000) (opt.DDS 10000/12000) rpm
Spindle nose taper – #50

Feed

Cutting feedrate – 10 m/min
Rapid traverse rate – 20/18/18
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (32/40)pcs
Max. tool weight – 20kg
Max. Tool size – A:Ø125x350L mm
Tool shank – BT50 / CAT / DIN /

Other

Electric power consumption – 30KVA
Floor space (full guarding) – 4000x4472x3620 mm
Net weight – 13500 kg

HCMC-1892

Machine Model box way Super Tornado – HCMC-1892

Table

Working surface – 1950×920 mm
T-slot (size x number x pitch) – 20x7x125 mm
Max. table load – 3000 kg

Travel

X-axis tarvel – 1800 mm
Y-axis tarvel – 920 mm
Z-axis travel – 820 mm
Distance from spindle end to table center – 200~1020 mm (opt.400~1220)
Distance from spindle center to column – 965 mm

Spindle

Spindle speed(gear) – 4000 (opt.6000/8000) (opt.DDS 10000/12000) rpm
Spindle nose taper – #50

Feed

Cutting feedrate – 10 m/min
Rapid traverse rate – 18/18/18
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (32/40)pcs
Max. tool weight – 20kg
Max. Tool size – A:Ø125x350L mm
Tool shank – BT50 / CAT / DIN /

Other

Electric power consumption – 35KVA
Floor space (full guarding) – 4500x4472x3620 mm
Net weight – 14100 kg

HCMC-2110

Machine Model box way Super Tornado – HCMC-2110

Table

Working surface – 2250×1020 mm
T-slot (size x number x pitch) – 20x7x150 mm
Max. table load – 3000 kg

Travel

X-axis tarvel – 2100 mm
Y-axis tarvel – 1020 mm
Z-axis travel – 820 mm
Distance from spindle end to table center – 200~1020 mm (opt.400~1220)
Distance from spindle center to column – 1080 mm

Spindle

Spindle speed(gear) – 4000 (opt.6000/8000) (opt.DDS 10000/12000) rpm
Spindle nose taper – #50

Feed

Cutting feedrate – 10 m/min
Rapid traverse rate – 15/15/15
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (32/40)pcs
Max. tool weight – 20kg
Max. Tool size – A:Ø125x350L mm
Tool shank – BT50 / CAT / DIN /

Other

Electric power consumption – 35KVA
Floor space (full guarding) – 5000x4950x3625 mm
Net weight – 16000 kg

HCMC-3110

Machine Model box way Super Tornado – HCMC-3110

Table

Working surface – 3250×1020 mm
T-slot (size x number x pitch) – 20x7x150 mm
Max. table load – 4000 kg

Travel

X-axis tarvel – 3100 mm
Y-axis tarvel – 1020 mm
Z-axis travel – 820 mm
Distance from spindle end to table center – 200~1020 mm (opt.400~1220)
Distance from spindle center to column – 1080 mm

Spindle

Spindle speed(gear) – 4000 (opt.6000/8000) (opt.DDS 10000/12000) rpm
Spindle nose taper – #50

Feed

Cutting feedrate – 7 m/min
Rapid traverse rate – 15/15/15
(X/Y/Z axis)

ATC

Tool storage capacity – A:24 (32/40)pcs
Max. tool weight – 20kg
Max. Tool size – A:Ø125x350L mm
Tool shank – BT50 / CAT / DIN /

Other

Electric power consumption – 35KVA
Floor space (full guarding) – 7400x4950x3625 mm
Net weight – 20000 kg